Mud-club

Vehicle & Technical => Discovery => Topic started by: loony landy on November 30, 2008, 21:51:43

Title: Fitting 35's??
Post by: loony landy on November 30, 2008, 21:51:43

Hi got a disco 5 dr and want to fit 35's to it.

What do ineed to give me the space etc, im running 2" lift springs at the moment .

Was thinking 2" body lift and 4" shocks to go with the springs, will this be enough??

cheers


tony



any pics of disco 5dr with 35's on would be great

Title: Re: Fitting 35's??
Post by: farmerboy4 on November 30, 2008, 22:10:06

ill have a pic of a rr with fedimas 36.5 on it, but youll have to wait to wed or thu, wink wink

Andrew

Title: Re: Fitting 35's??
Post by: wizard on November 30, 2008, 22:25:15

I have a 3 door with a 3 inch suspension lift and a 2 inch body lift. I recently put a set of 35 inch Mastercraft Coursers on.
They still scuff the inner arch and bumper on full articulation.
The main problem you will have is trimming the arches by the rear doors.

wizard

Title: Re: Fitting 35's??
Post by: loony landy on November 30, 2008, 22:29:09

yeah i know they will be a pain to sort out, may have to settle for 33's

Title: Re: Fitting 35's??
Post by: turbonutter on November 30, 2008, 22:44:38

im on 37" boggers , iv a 3 door van tho

has a 4" suspention lift and 2" body with cut arches

was running 35" pro comp with just the suspention lift and arch cuts and didnt have any rubbing

a 2" body lift is very easy , u may have to go higher on the suspention lift tho and that brings more things to think about , arms , props ect

u will have to chop the arches  , fitting the flexi arches and making a nice job of a 5 door takes a bit of time , jake from d44 did a thread on here when he cut his 5 door disco

heres mine on 37 boggers tho
http://i87.photobucket.com/albums/k159/turbonutter_2006/DSC00321.jpg

Title: Re: Fitting 35's??
Post by: loony landy on December 01, 2008, 09:55:16

Think it easier if i go for a set of 33's  :roll:

Then a body lift will mean less arch cutting too


tony

Title: Re: Fitting 35's??
Post by: digger on December 02, 2008, 20:27:45

i've got 33 kl71 on 10 j rims on my 3 inch lift cut arches and still rub

Title: Re: Fitting 35's??
Post by: Jake on December 02, 2008, 20:36:45

I've got 33's on a 2" lift with cut arches and have no problems with rubbing
I did test fit some 35's but they rubbed on my nasty flexi arches  :roll:
 :D

Title: Re: Fitting 35's??
Post by: Dr Evil on December 03, 2008, 17:17:58

33's are the way to go...
No major mods required, just a 2" lift and some flexi arches. I've got 33x12.5x15's on mine and they don't rub, even on full flex.

Title: Re: Fitting 35's??
Post by: digger on December 03, 2008, 17:45:19

i think mine rub because their on 10j rims their sick outside the arch

Title: Re: Fitting 35's??
Post by: wizard on December 03, 2008, 19:28:48

I stopped my tyres rubbing by cutting 2 inches of the bumper !!!

wizard