Mud-club

Vehicle & Technical => Range Rover => Topic started by: Lincs niva on December 22, 2008, 11:28:06

Title: RRC Steering guard
Post by: Lincs niva on December 22, 2008, 11:28:06

Im going to be helping a mate fit a steering guard to his rangey over the xmas break...

His rangey has a 2inch suspension lift and 2inch body lift..Will we run into any problems when fitting it???

Cheers Gav

Title: Re: RRC Steering guard
Post by: anaxemurderer on December 22, 2008, 12:27:40

Shouldn't do really, pretty straight forward job. Sometimes the bolts can be a bit tight, you may need a longer bolt for drivers side mount and they should have suplied a new bolt for passenger side mount.

Nick

Title: Re: RRC Steering guard
Post by: dod51e on December 23, 2008, 17:05:18

As stated above you should have no problems other then the usual siezed bolts!!  Get your mate to start soaking them with WD40 or similar in anticipation.  Mine went straight on with a similar lift to your mate's.
At least you will have something to look forward to over the Xmas break.  Good luck

Title: Re: RRC Steering guard
Post by: Lincs niva on December 24, 2008, 20:22:49

Cheers for the replys gents..Will have a go on boxing day..

Cheers Gav