Mud-club

Vehicle & Technical => Defender => Topic started by: Mash on January 02, 2009, 16:50:21

Title: Fan Heater Resistor
Post by: Mash on January 02, 2009, 16:50:21

Hi All,

Does anyone know what values ohmage and wattage the resistor should be that controls the heater fan speed...

Cheers Jon

Title: Re: Fan Heater Resistor
Post by: Jimbo on January 02, 2009, 20:12:42

According to the RAVE Cd it's "1E3 ohms", hopefully a mathematician will be along soon to translate that into real money !

Incidentally, I went looking for my heater resistor, as the fan refused to work on maximum speed (lever right down), couldn't find it - unless it's actually inside the heater box ?, so put the dash and everything back together - and as if by magic it's started working...........but for how long  :?

Title: Re: Fan Heater Resistor
Post by: Mash on January 02, 2009, 21:10:04

Thanks for that Jimbo..
If I remember correctly thats 1000 Ohms basically 1K but needless to see someone will correct me :)

From what I remember the resisitor is in the heater box close to the fan.
This should control the low speed setting.

Thanks again mate

Title: Re: Fan Heater Resistor
Post by: nellyscossy on January 03, 2009, 11:37:34

the resistor is in the blower box and it only controls the lower speeds..the fastest setting comes straight from the switch