Mud-club
Vehicle & Technical => Discovery => Topic started by: john6367 on January 06, 2009, 20:08:56
-
Hi All,
I have a probably common question for you all.
I have just purchased a secondhand safari snorkle for my200tdi disco.
I do however need a template to fit it.
Does any one have one I could use or they could copy for me.
Alternatively do you know of a place that can supply one.
Here's hoping
Thanks
John.
-
I have one but how would i copy it?
Jay.
-
i have one as well :D
-
I'm happy to send my one if you will send it back?!
-
Hi Jay & Wrecker,
The only way I think of that's cheap and easy is to trace round it onto a piece of A3 or if using a marker pen then onto a page from a newspaper.
If you could also mark the bolt holes and pipe hole. I could then transfer it back to card if required or use it as it is.
If either of you could do this and post it to me I would be a very happy man.
I would of course reimburse the postage etc if you include your address when posting it.
Let me know if you can and I'll PM my address.
Thanks
John.
-
im more than happy to do that for ya mate,
could do it on thin card and send to you :D
-
Thanks Wrecker,
I had a stroke of luck when I picked the snorkel up.
The guy I bought it from also gave me the wing it was fitted too. I can from that line up and drawer my own template
so hopefully should be ok. :dance:
Thanks for your offer and if you don't mind I'll keep it in mind in case my way doesn't work in which case I'll be
back in touch with you.
Thanks again.
John
BTW thanks to everyone who offered to help as well :clap: :clap:
-
no worries at all mate,
just shout if you get stuck and ill copy mine
good luck :D
-
Wrecker,
Just to let you know the snorkle is now fitted and working perfectly.
Thanks
John
-
thats good to hear mate,
how did you get on fitting it,ive done 2 so far and the 2nd was a bit of a pain to get the nuts and bolts on the back,the holes have to ve spot on :D