Mud-club
Chat & Social => The Bar - General Chat => Topic started by: Ridgeback on January 21, 2009, 14:45:26
-
I am about to do some welding on a mates disco. I need to hire a Mig set in Northampton but every place I call will not do one with Gas etc so the cost is going to be around £120 to hire one for the weekend when you add the gas and wire.
Does anyone know of a company that hire out the mig sets with Gas.
The other option is, I cut out all the rust, Cut the new parts ready to fit and take it to someone to do the weling. Does anyone know of a good place to get the welding done in northampton?
Its both sills that need to be done, most of the work is cutting and fabing the new bits so was thinking if its going to cost £120 to hire all the bits, It might be better to pay for just the welding.
-
I hired mine from HSS hire when I changed the engine in my 90. Cant remember how much it was but it included a bottle of Argon, mask and gauntlets to keep.
-
yah the goons at hss can supply gas but they have inderviduial depots and some of them wont have any welding stuff.
you will want "argoshield" gas the bottle should be blue with a green stripe on it
-
you have a pm Mr Ridgeback
-
Holly snot. A reel of 0.6mm wire should set you back less than a tenner, £15 for 5kg of the stuff if you aren't in the trade. Disposable bottles are anywhere between £7 and £10 for 10 minutes. SO how much is the welder costing you?
Much more than £110 and I'd be buying one.
Asfor gas, try a car boot, local pub etc. I'm told Bullseye motor factors will swap COs pub bottles for you.
-
Holly snot. A reel of 0.6mm wire should set you back less than a tenner, £15 for 5kg of the stuff if you aren't in the trade. Disposable bottles are anywhere between £7 and £10 for 10 minutes. SO how much is the welder costing you?
Much more than £110 and I'd be buying one.
Asfor gas, try a car boot, local pub etc. I'm told Bullseye motor factors will swap COs pub bottles for you.
Can get 95/5% argon mix for £40 for a pub size bottle, needs a deposit with first bottle £20.
£15 a fill for co2 pub bottles (not trade)
A large bottle argon 5 is £17 a fill + £5/6 a month +vat trade ;)
Steve
-
i bought a mig from machine mart . gas about 150 quid iff i remember , dont supose the amperage is the same as one you might hire but ive done 3 boot floors . rear x member, inner wings , sill repairs. still going o'k.. might be an option for ya . always there when you need it . which is quite often when you have a landy ;)
-
Thanks to all for your answers.
We cut some of the Sills out and the rust went into the inner sills as well. We found a place that is doing the lot for about £300.
I was a coded welder but don't have the kit at home. The welding sets you get for under £200 are not that good. They will only weld thin stuff and if you have lots of rust they make the job harder then using a good quality Mig set.
Then the Gas, as said above the small bottles you get for around £10 don't last long enough to finish tacking the job together, let alone finishing 2 full sides of a landrover.
HSS did have MIG sets but not at my local branch and they did not know about the Gas. They said it might cost £45 to get one delivered form another branch.
Thanks again for your help but I'm now off the hook.
(I hate welding other peoples cars anyway because what can start as a small patch can end up as 3-4 long days of work)