Mud-club
Vehicle & Technical => Discovery => Topic started by: muddymud on January 22, 2009, 18:47:03
-
1) what is the biggest size tye thats you can run on a discos and not run the risk of braking diffs?
2) where are the bold on the rear bumper of a 200tdi discovery?
cheers,
Nick
-
there is a bloke running 38.5inc boggers on totally standard axels somewhere. you also have to take into account the tread pattern, the more grip you have the more your half shafts will feel it!
bolts are on the insude of the bumper and is a bracket bolted onto the chassis :afro:
-
You can see the two bolt holes on each side of the rear cross member
(http://www.mud-club.co.uk/galleries/galleryimages/547418350f6c72445e0c4d5bf2076ca3.JPG)
:D
-
1) There is always a risk of breaking a diff. It's a Landy!
-
1) what is the biggest size tye thats you can run on a discos and not run the risk of braking diffs?
Depends how you drive/treat it. I've damaged 2x 10 spline diffs with aggressive 33" tyres and on both occasions it involved plenty of wheel spinning. Not the sort where a wheel is spinning with no gip and then suddenly finding grip and shock loads the transmission, just spinning with constant grip. Having run out of spare diffs my driving style has changed a little and I'm making better use of the winch, so far so good.
-
that sound ok, i think i will get a set of 31" will they fit on a discovery with a 2" lift and trimmed arches?
does any one elts have a discovery with no reversing lights?
im thinking of just putting some work lights on the back so when i revers i can just switch them on but i have no idea where i can put the lights as i don't want to put them on the rood as they will get ripped off when i go under trees, where have you lot put your lights?
Cheers,
Nick
-
All disco's have to have working reversing lights...it's the law :roll: ;)
-
All disco's have to have working reversing lights...it's the law :roll: ;)
No they don't !!! Ever noticed that they don't test for them in the MOT??
-
I have two work lights fitted on my guttering either side of the rear door, I've also seen a work lamp fixed by the rear door handle that shines down nicely.
-
My Discovery has 31" tyres and a 2" lift.
The tyres don't rub on the arches even on full articulation and the arches have NOT been trimmed.
So i would check first before you get the grinder out.
-
that sound ok, i think i will get a set of 31" will they fit on a discovery with a 2" lift and trimmed arches?
Probably the most common tyres used at pay and plays are 32" diameter in the form of 7.50-16, 235/85r16 or 265/75r16 all of which are standard sizes fitted to defenders. If you are going to increase tyre size I surgest you aim to fit tyres at least this big so that you no longer have issues in the ruts made by standard defenders. When I finnally fitted 7.50-16 tyres on my RRC it was very satisfing that I could drive most ruts without grounding out. Retreads come slightly oversided so if you get a 31x10.50 retread then they will probably be around 32" diameter.
-
All disco's have to have working reversing lights...it's the law :roll: ;)
No they don't !!! Ever noticed that they don't test for them in the MOT??
Nope, Reversing lights don't come under the MOT.
Disco ones are naff anyway, well at least mine are :roll:
-
All disco's have to have working reversing lights...it's the law :roll: ;)
No they don't !!! Ever noticed that they don't test for them in the MOT??
Nope, Reversing lights don't come under the MOT.
Disco ones are naff anyway, well at least mine are :roll:
was there not a hint of sarcasm in the original post ? :?
-
http://cgi.ebay.co.uk/LANDROVER-DISCOVERY-300TDI-COMPLETE-FRONT-END-KIT_W0QQitemZ280303389932QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item280303389932&_trksid=p3286.c0.m14&_trkparms=72%3A1301|66%3A4|65%3A12|39%3A1|240%3A1318
would this bolt onto my 200tdi? and make it look like a 300 or would i need a proper kit?
cheers,
Nick