Mud-club

Vehicle & Technical => Discovery => Topic started by: auf_wiedersehen_pet on February 01, 2009, 20:00:01

Title: Steel tube needed - 30mm ID -32mm ID
Post by: auf_wiedersehen_pet on February 01, 2009, 20:00:01: I need some steel tube with 30mm ID -32mm ID and a reasonably thick wall so I can add Hi Lift jacking tubes to my winch bumper on the Disco. Ive tried ebay without success.

Any suggestions? I only need about 300mm.
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: wizard on February 01, 2009, 23:07:22: I have a few bits of pipe knocking about. I'll have a look tomorrow.

wizard
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: auf_wiedersehen_pet on February 02, 2009, 17:32:30: Fingers crossed :clap: :clap: :clap:
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: boss on February 02, 2009, 17:53:02: i have some tube that sounds like a perfect match. 38mm O/D with 3mm ish wall. pm me your adress and i can send you some at the weekend
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: auf_wiedersehen_pet on February 02, 2009, 18:42:56: Quote from: boss on February 02, 2009, 17:53:02
i have some tube that sounds like a perfect match. 38mm O/D with 3mm ish wall. pm me your adress and i can send you some at the weekend

You are a real gent.

PM Coming with my address.

:clap: :clap:
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: Disco-andy on February 02, 2009, 18:59:25: Iv used hand rail tue, for that in the past. If you spot any one putting railings up, there always off cuts
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: boss on February 02, 2009, 19:16:55: also have accsess to scaff tube :lol:
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: wizard on February 02, 2009, 20:51:16: If you are not sorted yet i have a few bits.

wizard
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: J.D. on February 03, 2009, 14:13:54: Got a few bits in Winchester as well if that is any help.
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: auf_wiedersehen_pet on February 03, 2009, 18:00:37: Quote from: wizard on February 02, 2009, 20:51:16
If you are not sorted yet i have a few bits.

wizard
Quote from: J.D. on February 03, 2009, 14:13:54
Got a few bits in Winchester as well if that is any help.

Many thanks. Will keep you posted.
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: auf_wiedersehen_pet on February 11, 2009, 18:16:05: Got the bits today.

Many thanks to Boss for supplying & posting. Top man - and upcoming celebrity! Are you sure you don't want payment?

Now just got to find the time to do it!
Title: Re: Steel tube needed - 30mm ID -32mm ID
Post by: boss on February 11, 2009, 21:35:49: mr steel, if you want to pay me back some how see my latest topic in the bar :)