Mud-club

Chat & Social => The Bar - General Chat => Topic started by: diggerdog36 on February 20, 2009, 22:25:28

Title: Superwinch service guide
Post by: diggerdog36 on February 20, 2009, 22:25:28

Where can I get one, Im after servicing my EPi9.5 but want a guide on how to do it, I need to replace the solenoids too!
Im after a haynes style step by step guide to removing the motor/brake/gearbox etc.

Cheers peeps

Title: Re: Superwinch service guide
Post by: paul_humphreys on February 20, 2009, 22:33:32

The last time I wanted one for a Superwinch, I sent them an email asking and they emailed one back. But it was for an X9.

Paul

Title: Re: Superwinch service guide
Post by: diggerdog36 on February 20, 2009, 22:38:13

 :shock:
OK, Ill give that a shot!

Cheers boss

Title: Re: Superwinch service guide
Post by: V8MoneyPit on February 21, 2009, 10:20:05

It's dead easy. The only bit that you might consider not dismantling is the brake assembly on the end. Leave the circlips in place. It's the only part that needs 'setting up' afterwards, but even then, it's just a matter of preloading the spring by half a turn or so.

I've recently stripped and rebuilt my EP9. I replaced the drum bearings because they were shot. I also took the opportunity to seal the joints as I reasembled it.

Title: Re: Superwinch service guide
Post by: diggerdog36 on February 21, 2009, 21:18:05

Stumped at the first hurdle, how do I get the bridge cover off???  I took out the 4x 4mm Allen head bolts on the sides, but the thing wont come off, I cant see anything else holding it on.
Its an EPi9.5 by the way!!
(http://trekk4x4adventure.com/shop/images/epi95.gif)

Title: Re: Superwinch service guide
Post by: paul_humphreys on February 21, 2009, 22:24:38

Try this http://www.superwinch.com/UserFiles/File/EP_90-10902_OM.pdf

Paul