Mud-club

Vehicle & Technical => Defender => Topic started by: Sabo on March 01, 2009, 19:46:25

Title: Starter motor
Post by: Sabo on March 01, 2009, 19:46:25

Hi

Had this problem before!
I try to start the 200tdi and all I get is a click, so I keep clicking untill eventually the starter turns over, had this before 1 1/2 years ago so I changed the starter - a bit of a ........ to get off in that possition!
This morning all loaded to go out and guess what - it wouldn't start, it just kept clicking for about 20 mins even after tapping the starter with a hammer!  Went and left it for 10 mins and it clicked twice and then started, any idea what is going on.
The battery is fully charged.

Many thanks

Dave
110 200tdi CSW

Title: Re: Starter motor
Post by: Xtremeteam on March 01, 2009, 20:04:42

solenoid full o [!Expletive Deleted!]

remove the starter, undo the slenoid & clean the crap out, rebuild & refit, try starter before refitting the downpipe incase you have to take it back off again

Title: Re: Starter motor
Post by: trickydicky on March 02, 2009, 19:56:18

HAD THE SAME WHITH MY STARTER IT ENDED UP THET THE MAIN EARTH (I THINK )WIRE HAD WORN THROUGH AND WAS SHORTING OUT ON THE CASE SO I HAD NO CHOICE BUT TO CHANGE IT ITS BEEN ALL FINE SINCE. PERHAPS ITS A WIRING PROBLEM? 8-[

Title: Re: Starter motor
Post by: ian_s on March 04, 2009, 10:27:31

mine was doing this recently, turned out to simply be the nut on the main feed to the starter was loose :(

Title: Re: Starter motor
Post by: Sabo on March 04, 2009, 12:40:35

Thanks for advice, looks like I've got to get underneath again, best scrape the mud off first!

Dave