Mud-club

Vehicle & Technical => Defender => Topic started by: figgy on March 07, 2009, 21:10:35

Title: rear wiper motor conections forn 110
Post by: figgy on March 07, 2009, 21:10:35

i have been trying to wire a rear wiper motor .to my 110 rear door.there are two connector block on the wiper motor  one with two connections near the end of the motor .and three connection on the other block connector  any idea on which wires to connect to which connection.IE ignition live ,earth , wiper switch ,etc.

Title: Re: rear wiper motor conections forn 110
Post by: Jimbo on March 08, 2009, 08:44:24

The following connections and colours are from RAVE, for a '97 Defender - not sure if it helps ?

3-way connector, pin 1 - live feed from wash/wipe switch to rear wiper park switch (Green/Brown)
                            pin 2 - park switch (Green)
                            pin 3 - Earth (Black)

2-way connector, pin 1 - Motor Earth (Black)
                            pin 2 - Live feed to Motor, from wash/wipe switch (Green/Red)


Jim