Mud-club
Vehicle & Technical => Defender => Topic started by: jasonslaphead on March 08, 2009, 17:49:43
-
Im putting a discovery rear axle from a h reg 200tdi onto my h reg 90 and im wondering which brake hose to use. The part listed for the 90 is NRC9455 and the one that came from the discovery is NTC3458 ( I dont have the 90 axle off yet and I cut the one from the disco and only have half of it left so I cant compare them ) anyone who has done this before remember which brake hose they used ?
-
Hi Jason,
Are you looking to lift the 90, if so you might as well get some extended hoses, if not for the price, David at Llama with make them the length.
http://www.llama4x4.com/page9.htm (http://www.llama4x4.com/page9.htm)
-
did the same job a few weeks ago just attatched existing flexi onto disco axle.
-
i,m just painting my axle before it goes on but for 30 pounds ish i got a full set of goodridge hoses and give a bettle pedal
-
Not lifting it staying standard height, will order a new defender on then as the old one is probably getting past best. thanks for the help
-
BRAIDED PIPES ONLY A TENNER,WOULDNT WASTE THE MONEY ON RUBBER MATE!