Mud-club

Vehicle & Technical => Range Rover => Topic started by: iceman on March 24, 2009, 20:20:58

Title: Select neutral fault warning
Post by: iceman on March 24, 2009, 20:20:58

Can anyone help, my p38 has just started to display a 'select neutral' warning & 'slow down'. This first started shortly after a smell of burning whilst motoring. I have read that the control box is located under the  passenger seat, is this the ECU which also controls the air suspension? I will remove and shake this box tomorrow to find out if it has blown or can anyone help me to repair whatever the fault is.
Thanks in anticipation.

Title: Re: Select neutral fault warning
Post by: Rossko on March 25, 2009, 19:36:55

First action might be to check transmission oil level ...

Title: Re: Select neutral fault warning
Post by: iceman on April 07, 2009, 20:16:06

Thanks the oil level is ok. I have investigated the ecu beneath the passenger seat and found it to be well burnt so I have replaced it but I am still getting the select neutral warning and cannot engage low ratio !! I found a thread suggesting that the electric motor that controls the transfer box might be stuck so tomorrow I am going to tap it with a hammer. Hopefully that will put it right.
Does anyone have any ideas? :doh: