Mud-club

Vehicle & Technical => Defender => Topic started by: automania on April 05, 2009, 14:27:31

Title: 90 rear hub seal track (drums)
Post by: automania on April 05, 2009, 14:27:31

hi people just wondering if there is a replacebe seal track on the rear axle as per series motors? manual says if its worn replace the whole stub axle, and im struggling to tell if there is a replaceble bit or not, cant find it on paddocks either cheers

Title: Re: 90 rear hub seal track (drums)
Post by: Les Henson on April 07, 2009, 01:36:54

I don't think the seal land is replaceable - you could speedisleeve it though, but it might be cheaper if you just replace the stub axle. If you have a wear groove in the seal land, then fit the new seal further in or use RTC3511 seal (I think), which is double-lipped and will bear on the land in two places.


Les.

Title: Re: 90 rear hub seal track (drums)
Post by: automania on April 07, 2009, 18:20:29

cheers fitted a new seal an will have to see, stub axle only 40quid so fairly reasonable have to see. cheers