Mud-club

Vehicle & Technical => Defender => Topic started by: V8MoneyPit on April 20, 2009, 16:33:04

Title: Ignition switch wiring
Post by: V8MoneyPit on April 20, 2009, 16:33:04

I have a 1988 2.5TD and I can't remember how the starter switch is wired. I have a photo from before it came apart (18 months ago!), but I can't make out the wire colours. The wiring diagrams don't show pin numbers  :roll:

There are pins numbered 1 to 5.

The loom has the following wires:
Large brown
Large brown/red
Large white
Small white/red
Small white/orange
Small white/black

I believe the white/orange is unused on mine. It is for accessories, so I can graft it in if needed anyway.

Title: Re: Ignition switch wiring
Post by: ChrisW70 on April 20, 2009, 20:59:18

This one (http://forums.lr4x4.com/index.php?showtopic=9354) on LR4x4 has come in handy for me before.

Title: Re: Ignition switch wiring
Post by: V8MoneyPit on April 21, 2009, 09:30:35

Thanks, but I'm not a member of that forum so can't get at the diagrams!

I'll do a continuity test and figure it out!