Mud-club
Vehicle & Technical => Discovery => Topic started by: gnasha on May 12, 2009, 18:52:00
-
i have rangy axel's on my 90 with twin feed to the calipers what i want to no is will disco 300 calipers with the single feed bolt straight on or would i need the whole axel if they bolt on how much am i looking at for a pair of calipers
-
They will bolt on yes, but you will have to change the brake lines and the master cylinder. I am assuming your master cylinder is a 4 point one, in which case it will need changing to a 2 point one.
I should point out that anything you do regarding the brakes is entirely at your own risk. I am just pointing out how it could be done.
-
nar mines old 90 set up but with the R/R axel and brakes i have single brake line comeing down to wheel then splits to both inlets on the calipers
just i dont like how it looks with a t piece and extra pipe and would like to remove them and just have the pipe go straight into the caliper also less bits to go wrong this way