Mud-club

Vehicle & Technical => Discovery => Topic started by: big andy w on May 31, 2009, 22:00:39

Title: What are the exact bits i need to get rid of my rear donut? 2 days it lasted :(
Post by: big andy w on May 31, 2009, 22:00:39

Hi,

i understand its a range rover classic rear 4 bolt prop, but from what year,  which diff flange do i need? is it the same as disco 300tdi front diff flange??

Thanks in advance! :)

Title: Re: What are the exact bits i need to get rid of my rear donut? 2 days it lasted :(
Post by: Jake on May 31, 2009, 22:21:01

This might help
http://www.devon4x4.com/products_a/p1844c57/4-bolt-flange-kit.html
 :D

Title: Re: What are the exact bits i need to get rid of my rear donut? 2 days it lasted :(
Post by: craig_midz on May 31, 2009, 23:20:10

either a front 300 tdi diff or late 200 diff an a 200 tdi disco rear prop

Title: Re: What are the exact bits i need to get rid of my rear donut? 2 days it lasted :(
Post by: yellowbelly on June 01, 2009, 07:51:00

You just need the input flange from the front of a 200tdi diff. It bolts straight on after removing the spider and flange from the 300. I would suggest using a new lock nut though.

Title: Re: What are the exact bits i need to get rid of my rear donut? 2 days it lasted :(
Post by: wizard on June 01, 2009, 14:03:19

Swap it for a 200tdi rear prop and  200tdi diff flange.
Planty of breakers on Ebay.
Chuck the donut at your nearest LR dealer !!

wizard

Title: Re: What are the exact bits i need to get rid of my rear donut? 2 days it lasted :(
Post by: Lumbering Jack on June 01, 2009, 18:28:56

I did mine last week - brand new 4 bolt diff flange, nut, seal and dust cover £35 ish, second hand prop £25 and stuck a fresh UJ in at diff end to be sure - nowt of a job and drives much better now it's not vibrating at anything above 65!

Title: Re: What are the exact bits i need to get rid of my rear donut? 2 days it lasted :(
Post by: J.D. on June 01, 2009, 18:30:40

If you want part numbers you will need the following:

1 x STC4858 4 bolt differential flange
1 x 200TDi Rear propshaft

And a set of four propshaft nuts and bolts