Mud-club

Vehicle & Technical => Discovery => Topic started by: gnasha on June 15, 2009, 11:18:24

Title: anti roll bar
Post by: gnasha on June 15, 2009, 11:18:24

my mate is  getting his disco 300tdi ready for mot and has removed the anti roll bars will it pass or does he need to remove mounts for the bar it's a m reg

Title: Re: anti roll bar
Post by: Little-Green-Machine on June 15, 2009, 11:32:03

if you mean the mounting plates on the chassis then no, all discos have them.
hope this helps.

Title: Re: anti roll bar
Post by: gnasha on June 15, 2009, 11:36:47

i think it's the mounts on the axel he is thinking of cutting of

Title: Re: anti roll bar
Post by: hodgei on June 15, 2009, 13:03:37

Nope - I just unbolted everything and it passed OK.
The tester said 'if it's not there. then I can't test it can I... ;-)

Title: Re: anti roll bar
Post by: lurch_917 on June 23, 2009, 13:53:17

 no you just have to remove the drop links as the discos were type approved with both set ups

Title: Re: anti roll bar
Post by: wvanman on June 24, 2009, 07:58:35

removing the drop link arm off  is perfectly legal for an MOT  test