Mud-club

Vehicle & Technical => Range Rover => Topic started by: td5v8disco on July 09, 2009, 22:26:44

Title: rrc 3.5 v8 clutch problem
Post by: td5v8disco on July 09, 2009, 22:26:44

ive got a 3.5 with alittle clutch fault , became impossible to get in gear the other day so took the slave cylinder off and found it was sticking/semi seized so i replaced it , then it still wouldnt go in gear after bleeding the system , have now replaced the master cylinder and pipe/hose but still not getting enough pedal to select gears ???????? 
any ideas would be great

Title: Re: rrc 3.5 v8 clutch problem
Post by: squaddie_fox on July 11, 2009, 19:46:54

bent clutch fork?

Title: Re: rrc 3.5 v8 clutch problem
Post by: Range Rover Blues on July 12, 2009, 01:24:26

The throw of the clutch pedal is adjustable if it isn't clearing but TBH I'd say it sounds like it needs bleeding again, they can be a PITA to get bled sometimes.