Mud-club

Vehicle & Technical => Defender => Topic started by: Monkeymantulp on July 25, 2009, 22:29:48

Title: Exhaust mounting
Post by: Monkeymantulp on July 25, 2009, 22:29:48

Hi, when i bought my defender there was a real botched job on the rear exhaust mounting....
I've finally got round to fixing it but not sure what parts i need as i'm quite new to all this still  8-[ . The bracket that i think it needs mounting too that protrudes from the rear cross member is broken.

Is there anybody with photos out there of how it should ideally look on a 89 90,

cheers

Nick

Title: Re: Exhaust mounting
Post by: Jed on July 26, 2009, 20:11:04

A bit like this bud, but i made this one from some 40x40x3mm steel then drilled 4x holes in order that i could adjust the mount of the bracket that bolts ta it.

(http://i617.photobucket.com/albums/tt255/jed101/DSC00020.jpg)

Hope this is of some help.

Jed