Mud-club

Vehicle & Technical => Defender => Topic started by: Axetamer on August 21, 2009, 19:48:24

Title: What engine hoist to buy
Post by: Axetamer on August 21, 2009, 19:48:24

I'm in the market for an engine hoist,and am looking to pay up to £200 perhaps something like this:




http://www.machinemart.co.uk/shop/product/details/cfc1000lr-1t-long-reach-workshop-crane/path/workshop-cranes-engine-stands (http://www.machinemart.co.uk/shop/product/details/cfc1000lr-1t-long-reach-workshop-crane/path/workshop-cranes-engine-stands)

What do you guys use?

Title: Re: What engine hoist to buy
Post by: Range Rover Blues on August 21, 2009, 22:10:24

You don't need the long reach one.  I had a "normal" Clarke one but it got nicked.  Spend your money on a solid one, you don't want it flexing as that gets annoying.

Title: Re: What engine hoist to buy
Post by: davidlandy on August 21, 2009, 22:18:49

I got a long reach one - it saved taking all the front bumper and rad assembly out of the 90 - also as the engine sits quite far back on 200tdis/TDs/NAs  so it helps when putting the lump back in.

Title: Re: What engine hoist to buy
Post by: Saffy on August 21, 2009, 23:54:10

I have borrowed a bluepoint (snap-on) crane a few times, good quality piece of kit, if I was to own one that's what I'd be shopping for on the 2nd hand market. Not at full extension and can still leave large winch bumper and winch in place.
(http://www.stonefisk.com/media/blogs/FISKBLOG/windowslivewriter/clutchrenew_12827/clutchchange--11-.jpg)
http://www.youtube.com/watch?v=FnuquR9BzNY

Title: Re: What engine hoist to buy
Post by: V8MoneyPit on August 22, 2009, 10:36:50

I bought one the Clarke 'standard' reach cranes and it really isn't long enough for the 2.5TD or similar. I fitted the beam upside down and flipped the chain over the end of it just to give a few extra inches of reach.

It was just about OK for the V8 with a winch bumper on, but even then it was right on the limit.

The long reach one would have been so much easier.

Title: Re: What engine hoist to buy
Post by: Disco-andy on August 22, 2009, 11:19:16

I have done a few engines with my friends standard clarcks one and more length would have made life a lot easier.

Title: Re: What engine hoist to buy
Post by: Axetamer on August 23, 2009, 17:57:57

The long reach sounds the best bet then, cheers guys

Title: Re: What engine hoist to buy
Post by: Axetamer on August 26, 2009, 18:30:26

quick update,

bought this one off ebay, it ariived today...it's the same size as the machine mart one, but with 6 wheels and a bigger lift capacity, and nearly £45 cheaper


http://cgi.ebay.co.uk/2-ton-Heavy-Duty-Folding-Engine-Hoist-Lift-Crane-NEW_W0QQitemZ190330930235QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item2c509b843b&_trksid=p3286.c0.m14 (http://cgi.ebay.co.uk/2-ton-Heavy-Duty-Folding-Engine-Hoist-Lift-Crane-NEW_W0QQitemZ190330930235QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item2c509b843b&_trksid=p3286.c0.m14)

Assembly is tomorrow