Mud-club

Vehicle & Technical => Discovery => Topic started by: strapping young lad on March 31, 2005, 17:28:03

Title: bolt sizes
Post by: strapping young lad on March 31, 2005, 17:28:03

hello there

does anyone know the bolt sizes you need to mount the towbar back on a 200tdi disco?

i need two for the drop plate, two for the stabiliser arms and two to mount the stabiliser arms onto the drop plate

i didnt think i would be reinstalling it hence bolts went to mr binman

Title: bolt sizes
Post by: muddyweb on March 31, 2005, 17:44:42

Pretty sure the stabiliser arms are all M10

Title: bolt sizes
Post by: karloss on April 01, 2005, 23:40:18

Drop plate should be 16mm presuming it uses the same bolts as the ball.

Title: bolt sizes
Post by: strapping young lad on April 01, 2005, 23:47:34

nice one lads

cheers

dyf

Title: bolt sizes
Post by: Range Rover Blues on April 02, 2005, 13:47:42

The stab arms are M10 but will easily take M12 through the chassis, this is what is supplied with a Southdown.  Not sure if the stab arms to drop plate arn't smaller, these are the ones that snap when you're rear-ended.