Mud-club

Vehicle & Technical => Discovery => Topic started by: hrh_dave on October 19, 2009, 12:43:09

Title: door locks - further Q's....
Post by: hrh_dave on October 19, 2009, 12:43:09

Hi all...

Has anyone got any fitting instructions  for the door look springs??

cheers

Dave

Title: Re: door locks
Post by: wizard on October 19, 2009, 17:58:43

Hi
There are some photo's on my website.

wizard :twisted:

Title: Re: door locks
Post by: hrh_dave on October 19, 2009, 21:51:36

Thanks for that!!!


DMc

Title: Re: door locks - updated - further Q....
Post by: hrh_dave on October 21, 2009, 16:13:02

A small further question... do you have to cut the section of loom for electric mirrors as theres not enough loose wire to get the frame up high enough? Currently trying to do this with is lashing down and a foot in plaster... bloomin MOT's!!!!!

Title: Re: door locks - further Q's....
Post by: ChrisW70 on October 21, 2009, 17:00:46

There's a plug on the mirror wiring Dave, it should be within a couple of inches of the mirror, might be trapped in the top of the door.

Title: Re: door locks - further Q's....
Post by: hrh_dave on October 21, 2009, 18:30:52

Found that one.... but its too big for the whole....

Title: Re: door locks - further Q's....
Post by: ChrisW70 on October 21, 2009, 19:14:32

I think, from what I can remember, pull it up as far as it can go then unplug it insitu - the plug will come out then letting the window frame lift up and out