Mud-club

Vehicle & Technical => Discovery => Topic started by: dimoven on April 05, 2005, 17:33:27

Title: inner door seal
Post by: dimoven on April 05, 2005, 17:33:27

Is it easy to replace the rubber inner door  seal on a disco 1( driver side)?
Do I simply remove the old one and slip the new one, on or is sealant needed to fix the new rubber in place any suggestions appreciated.

Title: inner door seal
Post by: muddyweb on April 05, 2005, 18:10:43

Not difficult at all.  Just pull the old one off and the new one fits in its place.

You don't need any special glues or sealant

Title: inner door seal
Post by: Andy. on April 05, 2005, 18:40:46

Did my drivers door one last year, 10 minute job max.

Pull the old one off and replace with the new. Best to start in a corner I found and tapped it lightly all the way around with a hammer.