Mud-club
Vehicle & Technical => Defender => Topic started by: jimthelandyman on November 02, 2009, 19:42:20
-
Where can i get a snorkel that goes through the wingtop air vent as my snorkel that went throught the side vent doesn't fit with my roll cage ?
-
I've got an old one that Mantec did for the heater intake on the top of the wing. Maybe they still do them.
-
yeh they are the ones that i want will have a look on their website.
-
I'm doing exactly this on the RH side of mine. I'm having a local fabricator bend some 2.5" stainless tube and welding a flange on it to suit the wing top hole.
-
Or you could get a Southdown!!!
-
I'm a bit fussy i don't like the style or price of the southdown. Ive seen one that mantec do that goes through a cut hole in the wing and connects straight up to the air filter intake pipe.
-
You need to be careful about the ones that go through the vent holes in the wings,,,, they are very hard to seal up properly if you are intending to use the snorkle to go in deep water.
I have the southdown one and it is by far the best on the market!!!
-
Its not the ones that go through the side vent i am after one that goes through the top of the wing, as for the ones that do go through the side vent they can work when sealed up properly i had mine with water well over the bonnet numerous times and didn't fail.
-
Rebel 4x4 do a universal one that goes through the top of the wing.