Mud-club

Vehicle & Technical => Discovery => Topic started by: Mace on April 07, 2005, 14:35:34

Title: Ball Joints and U/J's
Post by: Mace on April 07, 2005, 14:35:34

1. What HAND are the threads on a 1995 Disco Drag Link? The track rod has one left and one right hand thread so you can adjust it's length. Is the drag link the same? I can't tell by looking.

2. What is the correct part number for the rear propshaft U/J. Not the rubber doughnut but the one at the transfer box end? It's either TVC100010 or RTC4587 or maybe neither !

Still scratchin' me 'ead, can't work it out. Need to order some new ones.

Thanks a million

Title: Re: Ball Joints and U/J's
Post by: NeilWilson on April 07, 2005, 14:57:04

Quote from: "Mace"

2. What is the correct part number for the rear propshaft U/J. Not the rubber doughnut but the one at the transfer box end? It's either TVC100010 or RTC4587 or maybe neither !

parts book gives:
RTC4587 JOINT-PROPSHAFT UNIVERSAL

Neil

Title: Ball Joints and U/J's
Post by: Mace on April 09, 2005, 10:33:23

I now know the answer, but due to that fact that only one of you helped me out, I'm going to keep it to myself. Ta

Title: Ball Joints and U/J's
Post by: beast5680 on April 09, 2005, 11:08:22

that would be the answer you put on the LRO forum then :D  i know as well now :wink:

Title: Ball Joints and U/J's
Post by: Mace on April 09, 2005, 12:45:35

Beast, keep it to yourself mate  :wink:  Don't want everyone knowing about it  :lol:

Title: Ball Joints and U/J's
Post by: beast5680 on April 09, 2005, 13:09:51

:-#