Mud-club

Vehicle & Technical => Defender => Topic started by: ben-dent on January 05, 2010, 23:42:53

Title: 90 bulkhead sizes??
Post by: ben-dent on January 05, 2010, 23:42:53

i have just won a bulkhead on ebay for my project build, and need to collect it,

so need the dimensions of the bulkhead please

from bottom of bulkhead to bottom of windscreen (height)
and the width of the outside door to door (width)

Reason im asking my dad has a company Transit Connect Van (and his boss's permission) and has offered to go and collect it with me
but am worried it will be too tall or long to fit in the transit van, and may need to take dads rangie and trailer to get it,

cheers in advance

Title: Re: 90 bulkhead sizes??
Post by: Disco-andy on January 05, 2010, 23:55:25

It will fit easy. I moved mine in the back of my 90.

Title: Re: 90 bulkhead sizes??
Post by: ben-dent on January 06, 2010, 00:03:01

want to make sure it will definatly fit as i have got a 100 mile trip to fetch it,

but for £26 i cant argue as it was loads cheaper than others at over £100 for stuff in worse condition

Title: Re: 90 bulkhead sizes??
Post by: landy_bug on January 06, 2010, 12:04:52

i had a bloke put my old series 3 bulkhead in the back of a citroen zx estate wind screen and all, with several other items as well. Also i used to put a trials motorbike in a renault kangoo complete to transport it to comps. it will fit no problems

Title: Re: 90 bulkhead sizes??
Post by: ChrisV8 on January 06, 2010, 17:02:33

About 1650mm wide x 900 mm high so it should fit I got one plus a load of bits in the back of my Jeep.

Just roughly measured the galvy one lying in the garage left over from my 90 rebuild that's almost finished.

Title: Re: 90 bulkhead sizes??
Post by: ben-dent on January 06, 2010, 19:08:16

cheers all, finally some one with measurement, will check it will fit tomorow,