Mud-club

Vehicle & Technical => Defender => Topic started by: military mad 110 on January 15, 2010, 19:19:12

Title: 300tdi
Post by: military mad 110 on January 15, 2010, 19:19:12: 300tdi flywheel cover needed anyone got one spare? does a 200 one fit?
Title: Re: 300tdi
Post by: Saffy on January 16, 2010, 22:08:10: flywheel cover ? the alloy housing that bolts on back of engine between engine/fly wheel or you mean the bellhousing that goes on that bit?
Title: Re: 300tdi
Post by: craig_midz on January 17, 2010, 04:12:37: no 200 flywheel housin wont fit if i remember rightly think 1 is thinner then the other but dont quote me on that its been a while lol
Title: Re: 300tdi
Post by: military mad 110 on January 17, 2010, 11:26:04: the bit that goes between the block and flywheel mine has a big chunk out of it and seeing as i have the engine out i thought i i should replace it now :doh:
Title: Re: 300tdi
Post by: sv130 on January 17, 2010, 12:06:28: Hi I,m pretty sure the 200 will not fit as they have a different oil seal round the crank iirc. However the Disco 300 and Defender 300 are the same so you may pick one up from a scrap disco easier (There,s more of them than defenders)

Gaz
Title: Re: 300tdi
Post by: Saffy on January 17, 2010, 17:23:13: I got one (95casting off a 300tdi) what you offering ?
(http://lh6.ggpht.com/_vsZEAUl5Nmc/S1NHRtjgfkI/AAAAAAAAHE0/_Odmae_XE8E/s720/FILE0087.jpg)
Title: Re: 300tdi
Post by: bogie on January 17, 2010, 18:53:21: Might be able to fit a 200 as the end of the blocks are the same?Dont quote me thou!
Title: Re: 300tdi
Post by: military mad 110 on January 17, 2010, 22:04:31: panic over ! thanks guys for ya help i have found one on its way to me now! were can i get a good clutch from i do a lot of off roadig and towing???
Title: Re: 300tdi
Post by: Range Rover Blues on January 18, 2010, 00:49:49: S**tpart do a H/D one, based on military I think. But there is a H/D one specified for the 300.
Title: Re: 300tdi
Post by: Saffy on January 18, 2010, 08:04:57: isn't the normal approach to upgrade to fit a HD clutch kit that is normal meant for a 300tdi 130 defender?