Mud-club
Vehicle & Technical => Range Rover => Topic started by: howlinmadmartin on January 20, 2010, 13:06:24
-
Hi guys I have a p38 1997 RR with aircon that only blows out cold air, the engine is running normal temp and both heater pipes are hot. I was told that there may be a servo stuck does anyone know which one or are there any other suggestions. Many thanks in advance,
Martin
-
mine had this problem on the drivers side only its the blend motor failed you might have a book emblem on your display telling you
most people say its a dash out job but it can be done without the dash comming out alot of work thou thats why ive put it off for so long
search for p38 blend motor theres loads of info on them
while your at it replace the matrix o rings as they will more than likely start to leak once you have upset everything so will mean dash out again for £1 worth or o rings
-
I have a P38 I'm breaking if you need parts, the dash is untouched bar the switches an heater panel. Thanks Brett 07766 005443
-
Thanks fellas don't want to take the dash out if I don't have to,will have a look tomorrow and re-assess the situation. Many thanks.