Mud-club

Vehicle & Technical => Discovery => Topic started by: john bean on April 16, 2005, 18:22:00

Title: Milemarker hydrulic winch
Post by: john bean on April 16, 2005, 18:22:00

Hi All,
I'm just about to fit a milemarker H12 with zf pump to my 200Tdi can anyone offer any hints or tips on fitting

Thanks,

John.

Title: Milemarker hydrulic winch
Post by: Andy. on April 16, 2005, 19:04:01

I think I'm right in thinking Rich (MZ6666) has a MILEMARKER HYDRAULIC WINCH fitted to his Discovery  :?:

He's selling the G4 roof rack on here so you may want to pop him a PM and ask  :?:

Title: Milemarker
Post by: chris9119 on April 16, 2005, 23:51:46

Hi John

I have a Milemarker fitted to my series 1. The only issue I had when fitting it was that the water pump gasket was not standard and therefore had to fabricate a new base plate for the pump (air con mounting place).

If you have a standard pully, then you need to upgrade to the one with two grooves. Disco ones are not cheap, but the defender one fits. Sorry, can't find paperwork to give you number. If you call the guys at Alfred Murray (milemarker), there'll tell you the part number.

Good luck.

Chris

ps: one point, sometimes when using the winch, the hazards come on. You need to lock the doors with the key, and open them with the fob!!!!!!!!!!!!!!, works for me :wink: