Mud-club

Vehicle & Technical => Discovery => Topic started by: Richy on March 14, 2010, 11:20:12

Title: Disco 200Tdi - side exit exhaust
Post by: Richy on March 14, 2010, 11:20:12

Has anybody made a side exit exhaust?
If so, was it fairly straight forward?
Does anybody have any photo's?

Thanks Rich

Title: Re: Disco 200Tdi - side exit exhaust
Post by: auf_wiedersehen_pet on March 14, 2010, 12:02:38

Try this....

http://www.mud-club.com/forum/index.php/topic,71161.msg592650.html#msg592650

Title: Re: Disco 200Tdi - side exit exhaust
Post by: stretchy on March 14, 2010, 18:11:01

make the cut as close to the back box as posible this will leave you about an inch after the braket to atache a new pipe. if you know someone doing a de cat there is a bend on that pipe thats perfect for a side exit. it just sits over the inch of pipe you have left and just clamp it up.

I would advise a bit of cheq plate on that back wing just for some extra suport and to help stop the vibration

i will have a look see if i have some pics

stretchy