Mud-club

Vehicle & Technical => Discovery => Topic started by: stretchy on April 15, 2010, 17:14:34

Title: load space suports on chassis ??
Post by: stretchy on April 15, 2010, 17:14:34

hiya guys.. there are 4 load space suports welded to chassis 2 on ether side with sticky ruber bits on top. now when you do a body lift thease become usless so shud I cut them off or put blocks in there?? how do the boot floors cope weight wise with no suports as i do cary big loads ??

stretchy

Title: Re: load space suports on chassis ??
Post by: wizard on April 15, 2010, 18:20:24

use these.....rear floor spacers (http://cgi.ebay.co.uk/Rear-Floor-Spacers-Land-Rover-Discovery-4x4-Body-lift_W0QQitemZ180380489350QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item29ff83d686)

wizard

Title: Re: load space suports on chassis ??
Post by: Range Rover Blues on April 16, 2010, 13:01:49

You have got to fit a spacer to them.

Title: Re: load space suports on chassis ??
Post by: stretchy on April 19, 2010, 17:44:10

is this a mot thing then ??

Title: Re: load space suports on chassis ??
Post by: hairyasswelder on April 20, 2010, 12:17:44

Quote from: Range Rover Blues on April 16, 2010, 13:01:49

You have got to fit a spacer to them.

Agreed.... I took the rubber off and welded some pieces of box to make up the difference, then refitted the rubber   ;)