Mud-club
Vehicle & Technical => Discovery => Topic started by: JumboBeef on April 16, 2010, 17:50:37
-
OK, call me a muppet, but I can't see how to get into the n/s front foglight on my ES (factory fitted, bumper mounted).
The handbook doesn't mention it, nor does the Haynes. Help!
-
dont quote me on this but are they a sealed unit??
sure someone else will correct me if i am wong
Rob
-
Great. How much for a new one then? :(
-
Found this:
http://cgi.ebay.co.uk/LAND-ROVER-DISCOVERY-1-L%2fH-FRONT-FOG-LAMP%6094-ON-%22OEM%22_W0QQitemZ370301715786QQcmdZViewItem?rvr_id=&rvr_id=&cguid=ecc300091240a0aad1e32c23ffb085c0
Over £80 incl P&P!!!
-
They are not sealed units, you do have to remove the lamp from the bumper and strip it down somewhat, be prepared for rusted nuts and bolts!
-
You can replace them, ive done it myself :D
get under the car and on the back of the foglamp there is a black cover that you turn halfway to remove. Bulb is held in with a wire clip that is a bit tricky to remove, you sort of sqeeze the ends togeather and pull. Once the clip is undone remove the bulb and reassemble.
Hope that helps
Brian
-
ok i am wrong again lol
-
Thanks!