Mud-club
Chat & Social => The Bar - General Chat => Topic started by: baz2236 on April 21, 2010, 19:05:01
-
Hi people whats the best way to paint a galvanized piece of metal. I want to get rid of the dull silvery colour and pain it black, Can i do it with etch primer and then normal rattle cans over the top. Any Ideas.
-
t-wash it first.
There's a bit of info in >
http://www.finishing.com/405/53.shtml
-
use a special metals primer baz. gets the best adhesion :dance:
-
I was going to use this http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_170745_categoryId_165625_langId_-1?cm_vc=IOV4PDPZ1#dtab (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_170745_categoryId_165625_langId_-1?cm_vc=IOV4PDPZ1#dtab)
As my primer and then a couple of coats of plasticoat or hammerite.
-
I was going to use this http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_170745_categoryId_165625_langId_-1?cm_vc=IOV4PDPZ1#dtab (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_170745_categoryId_165625_langId_-1?cm_vc=IOV4PDPZ1#dtab)
As my primer and then a couple of coats of plasticoat or hammerite.
It might last a few weeks :(
Galv needs special prep.
1) T-wash
2) etch primer
3) primer
4) top coat.
other option is shot blast and powdercoat but @ £13 a tin get i'd get a price
-
I"ve used Hammerite special metals primer in the past and had no problems.