Mud-club
Vehicle & Technical => Discovery => Topic started by: hrh_dave on April 23, 2010, 09:17:38
-
Hi all...
Our next project for Kirsty's Disco is fitting a set of facelift headlights... Has anyone done this, or know where I could find some more info on how its done???
Cheers
Dave
-
Will try and find the guide i saw :-k, i know the wing is different on the D2, so the wing on the D1 needs trimming to suit, but looking at my two on the drive it doesn`t look like major work
-
Will try and find the guide i saw :-k, i know the wing is different on the D2, so the wing on the D1 needs trimming to suit, but looking at my two on the drive it doesn`t look like major work
From one I saw a while back, the Wing is actually further back on the 300-tdi, and if you fit the facelift lights you end up with a gap between the light and the wing.
-
Did you mean 200 to 300, I've just done mine and it looks really good. Simmonites do a kit but it's the best (or worst) part of £300!!
-
Also if its just standard TD5 lights you want they are a straight swap for 300tdi headlights (only the headlights though) but this doesnt apply to the later TD5 style lights.
-
D2 pre facelift lights are a straight swap for D1 300 type, so that takes just 20 mins. That's the way I went.
-
We have a set of facelift ones.... I will get round to looking at it in more detail once the 110 is back up and running on the road again... wont be for a while as the steering box has just let go.... :(