Mud-club
Chat & Social => The Bar - General Chat => Topic started by: Saffy on June 21, 2010, 16:23:07
-
Is there a trick to getting a schultz gun started? Not used one before and took awhile before it suddenly started spraying and I am not sure exactly what I did other than a combination of turning it upside down (to prime?),putting my finger over the breather hole and swearing at it for a bit. The schultz/waxoyl/solvent solution I am using is well runny so don't think it was that (unless too runny?)
-
I found with mine that the pickup pipe was just a touch too long and with the can fully screwed on the pick up pipe stuck to the bottom :evil:
Took me ages to work it out and then cut the pipe at an angle and it works fine now, you will be suprised how little solvent you need, mine sprays neat waxoyl with no trouble at all............... 12 bar 8-[