Mud-club

Vehicle & Technical => Discovery => Topic started by: Dr Strangeglove on June 26, 2010, 12:58:05

Title: Changing a 1991 ABS to standard breaks!
Post by: Dr Strangeglove on June 26, 2010, 12:58:05

Changing a 1991 ABS to standard breaks!

Title: Re: Changing a 1991 ABS to standard breaks!
Post by: Range Rover Blues on June 27, 2010, 19:34:21

I replied to your post in RRC section but one thing you might not be aware of, the Disco ABS system looks very dirrefent to the RRC system, for one thing it has a "normal" master cylinder, the ABS unit is on the LHS inner wing.

Title: Re: Changing a 1991 ABS to standard breaks!
Post by: NIVAD on June 28, 2010, 16:06:52

Have you tried running with the electrics disconnected from the pump??

Title: Re: Changing a 1991 ABS to standard breaks!
Post by: Range Rover Blues on June 30, 2010, 00:09:41

I would NOT advise hat on the RRC system, you will have half od the front callipers working only, no rear brakes and no primary front brakes.