Mud-club

Vehicle & Technical => Discovery => Topic started by: stretchy on July 04, 2010, 19:25:26

Title: remove imobiliser on 300tdi
Post by: stretchy on July 04, 2010, 19:25:26

how do i remkove the spider unit from a 300tdi i just want to make it work with a key as the locks and key fobs are playing up.

stretchy

Title: Re: remove imobiliser on 300tdi
Post by: ChrisW70 on July 04, 2010, 19:29:37

The Definitive Alarm Spider Post (http://forums.lr4x4.com/index.php?showtopic=86)

Title: Re: remove imobiliser on 300tdi
Post by: stretchy on July 04, 2010, 20:57:43

big thanks chris..

so am i right in thinking the easy way would be to pull it out and solder some wires to it like the last picture??

will this bypass the central locking ??

stretchy

Title: Re: remove imobiliser on 300tdi
Post by: ChrisW70 on July 04, 2010, 21:40:34

Are you having issues with it not starting due to the immobiliser or just locking/unlocking? If it's immobiliser problems then the spider could be a suspect but if it's locking issues then it's unlikely to be an issue with the spider unit either the fob or the alarm ECU is more likely to be suspect.
You could go the down the road of an aftermarket alarm with central locking interface - the alarm ECU stays in-situ but basically does not get activated.

Title: Re: remove imobiliser on 300tdi
Post by: stretchy on July 04, 2010, 21:48:16

to be honest id realy like to rip out imobiliser central locking and alarm. i just want the nesceray wiring for it to start on the key.

stretchy