Mud-club
Chat & Social => The Bar - General Chat => Topic started by: stretchy on October 12, 2010, 20:02:35
-
got no spark on my scrambler honda cr125
any ideas Ive cheked all the wires and put new plugs in still wont spark
-
coil or cdi
-
if its got a kill switch check that first
-
ive disconceted the kill and left it open and also kicked it with it closed still nothing.. ive got the coil and stator plate with coil on it all striped down checking the ohmes with a meter and it all seems fine. you can run power through it all and the omes are more or less by the hynes manual
doing my nut in
-
H.T lead or cap ?? Dont really know much about um, But a thought anyhow :-k
-
It's junk,
I'll give you a tenna for it ;)
-
got it going again :-k very strange... the only thing i did was cut half inch of the ht lead and rescrew the spark plug cap back on and it fired first time it was making good contact befor as I cheked it with the meter... just glad its not my stator plate as for this old 2 smoker its around 100 quid
-
Id guess hats the difference between basic electrical continuity and HT grade continuity. Id expect meter would show fine even if only 1-2 strands of copper were working, bit that would not be enough for a decent spark. Well done for sorting!
-
I knew it :dance: :lol:
-
yes its still fireing up nice on first kick cheers guys