Mud-club

Vehicle & Technical => Range Rover => Topic started by: dazzawhipple on June 27, 2005, 16:23:05

Title: V8 Carb pipework
Post by: dazzawhipple on June 27, 2005, 16:23:05

Not sure where to post this but I will start here

I am changing engines over but didn't take this V8 out so am a bit lost on the pipework can you help

Re the picture below

I think A , A go to B, C and C and i think D to E

and the oil pump fitting anybody have a part number for this


Thanks

Darren

Title: V8 Carb pipework
Post by: Paul on June 27, 2005, 21:23:04

Darren,

The photos are a bit small to make anything out.

Stick some larger ones in your gallery and post a link to them. :wink:

Title: V8 Carb pipework
Post by: dazzawhipple on June 27, 2005, 21:39:45

http://members.mud-club.com/profiles/dazzawhipple/gallery/V8pipework

There a bit bigger in this gallery


Cheers

Darren

Title: V8 Carb pipework
Post by: luffy on June 28, 2005, 09:08:12

On my engine, the rocker cover breathers (A) go to each carb body - i.e there's one B on each carb.

Your other connections are correct.

With regard to the oil pump, I can't remeber if that's the oil temp sender or oil pressure switch, but I think it's the pressure switch in which case you need:  (from Paddocks website)

AMR2092 Oil pressure switch - 8.25:1, 8.13:1, 9.35:1comp £1.80 + vat

HTH