Pages: [1]   Go Down

AuthorTopic: 300tdi engine mounts  (Read 9843 times)

0 Members and 1 Guest are viewing this topic.

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« on: September 07, 2005, 22:56:45 »
Hello all
I'm in the process of fitting a 300tdi engine onto a 200tdi chassis & I need to know the exact position the engine mounting points need to be moved to :roll: . Can anyone help :?:
Thanks guys
Jeff :)
Logged

Offline landyman Ash

  • Posts: 1661
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
300tdi engine mounts
« Reply #1 on: September 08, 2005, 10:40:29 »
They are the same arent they?

I think you'll find the 2.5 to 300 where all the same?

Be curious to find out if they are different.  Ive got a template for 300tdi mounts that bolts to the chassis.  I'm hiring it out if you fancy it.  Cost me nearly £50 but BOY does it make it easy!!!!  If you wnat it you can hire it for £10 and I'll post it out to you just send it back when your done mate.  If you want it, PM me your details
Logged
Ashley (but everyone knows me as Ash...)

Roxanne the 88" 300tdi auto Hybrid Trayback thats broken more than its fixed
Rosie the 300 Tdi auto disco that picks the hybrid up when broken...
Daisey the trailer that sits behind Rosie and lies under Roxanne.
The sexy threesome!!!!!!

Offline Porny

  • Posts: 1413
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
300tdi engine mounts
« Reply #2 on: September 08, 2005, 15:15:30 »
Quote
They are the same arent they?

I think you'll find the 2.5 to 300 where all the same?


Nope....

2 1/4, 2.5 (petrol and diesel), 2.5 Td and 200Tdi all have the same engine mounts in the same place.

300Tdi, Td5 (and V8') are different...

Engine and box was moved 2" further forward when the R380 was fitted... and the mounts are different.


Ian
Logged
Buy me another drink - you're still ugly!

Land Rover Diesel Tuning and Diagnostic  http://www.irbdevelopments.com - Mud-Club Member Discount - pm for details!!!

Offline landyman Ash

  • Posts: 1661
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
300tdi engine mounts
« Reply #3 on: September 08, 2005, 17:38:18 »
Well you learn something new everyday!

Thanks for that Porny, apprecaite that
Logged
Ashley (but everyone knows me as Ash...)

Roxanne the 88" 300tdi auto Hybrid Trayback thats broken more than its fixed
Rosie the 300 Tdi auto disco that picks the hybrid up when broken...
Daisey the trailer that sits behind Rosie and lies under Roxanne.
The sexy threesome!!!!!!

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #4 on: September 08, 2005, 19:20:40 »
Thanks Landyman for your kind offer but I was hoping to start tomorrow so I won't have time to wait for the post, but thanks again, you're a gent.


Porny, do you mean that the engine mounts were moved towards the bulkhead, as I've measured up & according to me thats the way it needs to go, but I don't know by how much. Are the 2 inches you mentioned an actual measurement?

Thanks fellas
Jeff
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
getting desperate
« Reply #5 on: September 09, 2005, 13:59:12 »
anyone got any ideas as to how I can get these measurements, or anyone know who I could contact who might know them?? :cry:

Cheers guys (& gals)

Jeff
Logged

Offline Porny

  • Posts: 1413
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
300tdi engine mounts
« Reply #6 on: September 09, 2005, 20:06:12 »
Quote
Porny, do you mean that the engine mounts were moved towards the bulkhead, as I've measured up & according to me thats the way it needs to go, but I don't know by how much. Are the 2 inches you mentioned an actual measurement?


The engine and box were moved 2" away from the bulkhead....i.e. the engine was moved closer to the radiator, which in turn moves the gearbox forwards.

However, this AFAIK is not actual measurements...
Although the engine and box were moved forward, I'm not sure of the relative position the mounts on either the engine or the gearbox... I seem to remember that the 300Tdi also has a different gearbox cross member.

I'd personally give Richards Chassis, or Marsland or even Buryas Bridge ring.  Richards and Marshland both produce 300Tdi replacement chassis, and Buryas Bridge carry out numerours 300Tdi conversions.

I've spoke to Buryas Bridge and Richards Chassis in the past and found them both more than helpful.

The other place you could try is M&D who landyman1978 has already mentioned.

I know that you can mount the R380 box on the LT77 chassis mounts, if you take the mountings off the LT77.  You could then weld the engine mounts to the chassis to suit.

However, this will mean your engine will sit further back than standard, which results in you having to modify hoses, oil cooler pipes, exhaust etc etc to fit.

Sorry I can't be of any help.


Ian
Logged
Buy me another drink - you're still ugly!

Land Rover Diesel Tuning and Diagnostic  http://www.irbdevelopments.com - Mud-Club Member Discount - pm for details!!!

Offline Porny

  • Posts: 1413
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
300tdi engine mounts
« Reply #7 on: September 09, 2005, 20:16:26 »
Logged
Buy me another drink - you're still ugly!

Land Rover Diesel Tuning and Diagnostic  http://www.irbdevelopments.com - Mud-Club Member Discount - pm for details!!!

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
many thanks
« Reply #8 on: September 09, 2005, 21:45:57 »
Ian,
You've been loads of help

Thats fab

Many thanks

Jeff
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
JOB DONE !!!
« Reply #9 on: September 17, 2005, 21:12:02 »
If anyone's doing the same, you need to leave the g.box mounts where they are & move the engine mounts back by about 45 mm.
cheers
Jeff
Logged

Offline landyman Ash

  • Posts: 1661
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
300tdi engine mounts
« Reply #10 on: September 18, 2005, 10:52:26 »
So all in then?  

Any pics?  Would love to compare it with mine

Well done all the same!  :D
Logged
Ashley (but everyone knows me as Ash...)

Roxanne the 88" 300tdi auto Hybrid Trayback thats broken more than its fixed
Rosie the 300 Tdi auto disco that picks the hybrid up when broken...
Daisey the trailer that sits behind Rosie and lies under Roxanne.
The sexy threesome!!!!!!

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #11 on: September 18, 2005, 11:37:40 »
Yes, bit busy this aft. I'll post some pics this evening.
cheers
Jeff
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #12 on: September 19, 2005, 21:56:33 »
Sorry Landyman, aol went down on me (oo er!!) just got back online. Will post some pics asap.

cheers

Jeff
Logged

Offline landyman Ash

  • Posts: 1661
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
300tdi engine mounts
« Reply #13 on: September 19, 2005, 22:01:02 »
Its okay mate, just curious really.  Wanted to compare techniques really.
Logged
Ashley (but everyone knows me as Ash...)

Roxanne the 88" 300tdi auto Hybrid Trayback thats broken more than its fixed
Rosie the 300 Tdi auto disco that picks the hybrid up when broken...
Daisey the trailer that sits behind Rosie and lies under Roxanne.
The sexy threesome!!!!!!

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #14 on: September 21, 2005, 19:20:19 »
A bit difficult to get decent pics but here goes........
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #15 on: September 21, 2005, 19:22:09 »
second pic
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #16 on: September 21, 2005, 19:23:29 »
third pic
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #17 on: September 21, 2005, 19:25:20 »
4th pic
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #18 on: September 21, 2005, 19:27:07 »
5th pic
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #19 on: September 21, 2005, 19:29:05 »
6th pic
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #20 on: September 21, 2005, 19:30:29 »
7th pic
Logged

Offline landraver

  • Posts: 690
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Swansea
  • Referrals: 0
300tdi engine mounts
« Reply #21 on: September 21, 2005, 19:32:25 »
8th pic
Logged
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal