Help having withdrawal symptoms now!!

[timberdog]

I am new to the Forum and could do with some help lads!!


I Am nearing the end of a Disco 200 TDI converstion into my 90 Its getting my frustrated now as i am at the stage of finding out what Fuel pipes go were and Fabricating the Coolant pipes to fit etc.

The other bit is wiring up and Intercooler and Rad

Can anyone land an eye and a pair of hands and live near Nuneaton Warickshire

[Xtremeteam]

if yyou were up here i could lend a hand & tell you what fits best but cnat so ill just have to offer some moral support,i did a disco into a 90 bout a month ago & since then thers been loadsa folk doin them,if you have a prob holler n ill try n point you in the right direction,

of the top of my head theres stefan,Mtyrell & a few others all doin the conversion roughly about now

[timberdog]

Hello mate have you  got any pics of how you got round the Turbo and Pipe off it going to bottom of Intercooler as its tight as a [!Expletive Deleted!] against wheel arch cover in engine bay and seems to squash the rubber u bend pipe off Turbo

Also how you piped to Lower Hose on Intercooler?

I might have to chop out some of the engine bay on Turbo??

off the bottom of Turbo here

[Xtremeteam]

what i did before i fitted the engine for the last time is roughly mark where the hose was gonna go n heat it with the oxy bottles & bash the wing otwards to make some more room,the hose i used of the turbo on the presuure side was a def TDI 90 degree bend that i already had of my dads TD when we fitted it with a intercooler,basically for the intercooler pipes used a DEF pipe work but moded slightly,

bottom metal pipe was shortened by about an inch & welded back together & the top hose is a 90 degre bend with a long tail into an up n over pipe over the air intake into a short red sillycone hose into the intercooler

[timberdog]

Hello mat ya got any pictures to show?