AuthorTopic: mot test - true or false ?  (Read 1226 times)

0 Members and 1 Guest are viewing this topic.

Offline Mark2Disco

  • Posts: 232
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Northampton
  • Referrals: 0
mot test - true or false ?
« on: January 30, 2006, 00:07:29 »
hi

is it true or false  that to mot a permanent all wheel drive car such as discovery it should be brake tested on a double rolling road and not on a single one

testing on a single one and then selecting neuteral in both gear boxes and then testing causes damage ?  true or false ?

does this causes damage to the gear boxes ?

and finally anyone know where to take mine for mot in birmingham

thanks
mark
Discovery TD5

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
mot test - true or false ?
« Reply #1 on: January 30, 2006, 00:15:15 »
it can be tested on a single axle brake roller by putting both the Tbox & g box into neutral with no problems,

However if it has a borgwarner Tbox (Tbox lever says H-N-L) then it cant be done
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??


Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
mot test - true or false ?
« Reply #2 on: January 30, 2006, 00:21:08 »
MOT stations have had a memo to this effect last year, we arn't the only grooup who have this problem, any car with a LSD of any sort will cause potential damage and can harm the tester in extreme circumstances.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Richie_EB4

  • Posts: 520
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
mot test - true or false ?
« Reply #3 on: January 30, 2006, 07:43:55 »
The other way is to use a meter that sits on the floor of the car and when driven out on the road the tester can apply the brakes and the tilt meter gives him a reading..........not very effective IMO...........also watch the tester when he try's the hand brake  :o .........seen some very nasty results from these been applied when moving.
Where there is mud there will be someone stuck.........then the fun begins

Owner www.4x4lrs.com

Administrator  www.4x4uk.org

4x4RNE Commitee member www.4x4RNE.co.uk

Defender TD5...K88 MUD
2" lift
Mach 5 rims with 33/12.5/16's
Mile marker H12 with 9.5mm Plasma rope
Steering Guard and front and rear diff guards
Safari Snorkel and roof light bar.

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
mot test - true or false ?
« Reply #4 on: January 30, 2006, 08:29:04 »
Quote from: "Richie_EB4"
The other way is to use a meter that sits on the floor of the car and when driven out on the road the tester can apply the brakes and the tilt meter gives him a reading..........not very effective IMO............


True, this is how its done at my local, also he's checking for any pull on the system either left or right and front and rear, also when inspecting the brake system on the ramp he will pay close attention to any obvious problems round the brakes which would normally show up on the rolling road test

As far as the handbrake goes he applies the brake and then lets the clutch out slowly to see how much hold the handbrake can take. Also parking on a hill as he goes round the block
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

PUX

  • Guest
mot test - true or false ?
« Reply #5 on: January 30, 2006, 12:05:42 »
the mot place where i have mine done use a tapley gauge and takes it for a spin  :wink:

Offline Dr Neil

  • Posts: 818
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
mot test - true or false ?
« Reply #6 on: January 30, 2006, 20:57:10 »
with the new M.O.T computerisation it tells you that you carn't test the brakes on  the brake rollers, you should use the taply meter(however it's spelt)
200tdi over 200kmiles
+2"lift.
Procomp Es9000 shocks
235 MT's on silver modulars
diff guards
tank guard
Paidia4x4 winch bumper.
Discoparts HD rear bumper.
Champion 10000N winch
CB and CDplayer
Safari snorkel
modified turbo actuator vac pipe pick up.
twin batteries with Paidia4x4 split charge system
roof lightbar

Offline camaroneil

  • Posts: 16
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
mot test - true or false ?
« Reply #7 on: January 30, 2006, 23:29:56 »
i have a posi axle on my corvette and the mot guy normally just forgets to do the rears as he knows i keep my car up to scratch,
dunno whats gonna happen with the new computerised mot tho,
natt

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
mot test - true or false ?
« Reply #8 on: January 31, 2006, 00:01:55 »
I don't think the computerised MOT system needs to see the results of a rolling road test, the examiner has to be satisfied that the brakes are functioning correctly, and the Tapely guage is adequate for this purpose, probably more reliable than the rolling road in fact, whhere a lock-up is a pass even if it locks up at low power because the tyres are s**t.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline kinkyvicar

  • Posts: 12
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
mot test - true or false ?
« Reply #9 on: January 31, 2006, 18:28:06 »
hi i take mine to a place on short heath road erdington next to the builders merchants, takes it out on the road to test the brakes, he seems very fair
I feel randy, in my landy
let us pray
 

Discovery 300 TDI
  1 1\2" lift, Abar, spots, roof bar with 4 spots, A\T tyres, k&n air filter, hyclone, wheel spacers, not very clean!!

Offline Matt_H

  • Posts: 948
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
mot test - true or false ?
« Reply #10 on: January 31, 2006, 22:08:15 »
according to LR specs, it's ok to have one set wheels moving at up to 5mph (may be kph).. no idea how fast the roller go, but I stopped using one place when I saw them test it on rollers and do the hand brake in the same way.. asked my local independant who they used and have been going there since - they always take it out on the road and test brakes there.  Never seen them take one of those swing meters with them but not paid a huge amoutn of attention once I knew they knew what they were doing as it were!

Matthew

Offline Mark2Disco

  • Posts: 232
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Northampton
  • Referrals: 0
mot test - true or false ?
« Reply #11 on: February 02, 2006, 20:55:20 »
thanks for all the replies
most helpful
test booked will see what they do ?
cheers mark
Discovery TD5

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal