AuthorTopic: Handbrake cable  (Read 1320 times)

0 Members and 1 Guest are viewing this topic.

Offline zacjake

  • Posts: 42
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Handbrake cable
« on: March 29, 2006, 16:34:42 »
Does the the cable screw into the bracket, rear of the handle?As I think I broke mine when removing it.Is there a quick fix?
Please Help. Thanks :(

Offline colinreed

  • Posts: 29
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Handbrake cable
« Reply #1 on: March 29, 2006, 17:29:24 »
If it's a 200Tdi then yes it does screw into a bracket. As for a temporary fix see here

http://www.landrovernet.com/forum/attachment.php?attachmentid=29112&d=1137001923

Colin

Offline zacjake

  • Posts: 42
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Handbrake cable
« Reply #2 on: March 29, 2006, 18:07:43 »
Thanks,has anybody got a part number for the handbrake bracket?
Thanks.

Offline colinreed

  • Posts: 29
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Handbrake cable
« Reply #3 on: March 29, 2006, 18:51:06 »
The bracket is part number NRC7984. (From the John Craddock website  Part Number : NRC7984 PLATE ABUTMENT HANDBRAKE 4 CYLINDER 90-110. £11.77)

Colin

www.REEDX.net

Offline zacjake

  • Posts: 42
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Handbrake cable
« Reply #4 on: March 30, 2006, 05:59:58 »
Seems expensive for the handbrake part!

Offline colinreed

  • Posts: 29
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Handbrake cable
« Reply #5 on: March 30, 2006, 07:19:13 »
Yep :-) A cheaper alternative is to make a replacement part yourself. A suitable sized piece of flat bar with an M16 x 1.5 nut welded to it would only cost about a £1 and take 15 mins to make.
Colin

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal