Navara Front A Bar too low ? heres the fix

[Brian the Sn@il]

I bought a front a bar for the Navara D40, and the front fixings were way to low. Bent them on a green lane.

So what i did was cut down the front lower fixings by 50mm. Thus raising up the A Bar 50mm

You need a Hacksaw and a migwelder to carry this out and took me about 1 hour to do.

I also did this without taking the complete A bar off, i did one side at a time.

50mm isnt much, but its better than it was. At a real push 60mm can be achieved, but im not re doing it just for 10mm :lol:

[Brian the Sn@il]

ypu can now see the top of the A bar from the drivers seat, which makes you feel good :lol: and it gets more respect ;)

[Brian the Sn@il]

with muddy pics

[Firestarter]

great, thanks for the pics Brian  :D

[Firestarter]

........................ the 2 L-shaped bars that go into the front grille, are they bolted to the fixing by the top of the rad with 2 x 10mm nuts (not supplied)?

[Brian the Sn@il]

yep the 2 stainless bits of flat bar, bolt to the rad fixings using the 10mm bolts.

I think you undo the existing ones and screw them back on.