Pages: [1]   Go Down

AuthorTopic: Assistance again  (Read 806 times)

0 Members and 2 Guests are viewing this topic.

Offline timberdog

  • Posts: 643
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Assistance again
« on: June 05, 2006, 20:54:42 »
Right me indicators are intimitant ..i have narrowed it down to what i call the Ticker box behind main fuse box...

its a sealed plastic see through box with contacts inside..it stops ticking and the indicatos lights on dash stop working and the Ticker box stops ticking...give it a tap and then it will work...so i can only assume the contacts in the box are pited and the unit needs to be replaced?

Can someone tell me if they have a spare or were i can get one if this is at fault?

Also at the same time the Main beam flash wont work on stem but flick it on lock forward its fine ...just the flash wont work ...any ideas?
Logged





Marriage is the only war where you sleep with
the
enemy.

Landys i Own:

90 COUNTY 200TDI
LIGHTWEIGHT 2 1/4
Range Rover Bob Tail 3.5V8

Offline timberdog

  • Posts: 643
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
box
« Reply #1 on: June 05, 2006, 21:00:03 »
sorted the main beam now

just the relay ticker for indicators?
Logged





Marriage is the only war where you sleep with
the
enemy.

Landys i Own:

90 COUNTY 200TDI
LIGHTWEIGHT 2 1/4
Range Rover Bob Tail 3.5V8

Offline doctorvaltar

  • Posts: 117
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Assistance again
« Reply #2 on: June 06, 2006, 01:20:32 »
Sounds like you need a new indicator relay. I just got one from Paddocks, I think the website is www.paddockspares.com but I would call them because there are a few different types

Make sure all your fuse terminals are nice and clean, also had the problem with the main beam lights. Found a bit of corrosion in the fuse box. Gave it a good clean up and changed the relay and they both worked ok!!
Logged
James

90 V8 that is costing me a fortune!!

Offline woody

  • Posts: 927
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
Assistance again
« Reply #3 on: June 06, 2006, 09:12:04 »
your flashers are supposed to be intermitant

ON OFF ON OFF ON ON OFF ON OFF ON ON OFF ON OFF ON ON OFF ON OFF ON ON OFF ON OFF ON ON OFF ON OFF ON  :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol: :lol:  :lol:  :lol:  :lol:
Logged
Never underestimate the power of a sick mind !!!!
What would scooby doo!!!!
remember if you camp next to the toilets you get to meet everybody at least once over the weekend
R reg Discovery 300tdi  NAMED: Scooby Doo !

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Assistance again
« Reply #4 on: June 06, 2006, 13:45:10 »
There are a couple of types of flasher units, the basic one being the two cable variety, these are dead easy, I had mine go on the hybrid, bypassed the old one and stuck this unit in line, it may not have a loud click but it works ok on the flasher repeaters.

Of course with a hazard 4-way circuit its a whole different ball game
Logged
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal