Pages: [1]   Go Down

AuthorTopic: Key wont turn in ignition  (Read 976 times)

0 Members and 2 Guests are viewing this topic.

Offline winchman

  • Posts: 1038
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Key wont turn in ignition
« on: July 13, 2006, 19:26:24 »
1994 300TDi how do I get the barrell out to fit a new one?
How much is a new one
I need to remove the barrel ASAP as need to do the school run in the morning.
It has done this before but managed to jiggle it ant it worked, but not this time
Logged
Remember it will come in handy even if you never use it

Offline petergalileo

  • Posts: 518
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Key wont turn in ignition
« Reply #1 on: July 13, 2006, 21:54:50 »
You will be better off getting a new ignition switch, removal and refitting is pretty straight forward but you will need a small chisel to remove the bolts fixing the thing to the steering column, you will also need to replace the bolts as they arnt re-useable.

When your key started to stick its a sure fire indication the barrel was on its way out.

Peter
Logged
1996 300TDi Discovery ES - Java Black, Stainless Bullbar, Electric folding mirrors, TD5 Steering Wheel in Beige - Doesn't get muddy !

Freelander 1.8 Xi - LR Bodykit, Light Guards.

Offline winchman

  • Posts: 1038
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Key wont turn in ignition
« Reply #2 on: July 13, 2006, 22:12:50 »
Cant I just buy the barrel? or must I buy the whole assembly?
Logged
Remember it will come in handy even if you never use it

Offline petergalileo

  • Posts: 518
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Key wont turn in ignition
« Reply #3 on: July 13, 2006, 22:24:29 »
According to my parts book you can only obtain the whole ignition switch as an assembily.  What you call a barrel Land Rover call the whole casting.
Logged
1996 300TDi Discovery ES - Java Black, Stainless Bullbar, Electric folding mirrors, TD5 Steering Wheel in Beige - Doesn't get muddy !

Freelander 1.8 Xi - LR Bodykit, Light Guards.

Offline winchman

  • Posts: 1038
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Key wont turn in ignition
« Reply #4 on: July 13, 2006, 22:27:11 »
I have the Rave soft ware and cant find it on there?
How much then?
I just need to get it started in the morning to do the school run, I should be able to get the barrel out, I bet its the same as one of the other Rover ones?
Logged
Remember it will come in handy even if you never use it

Offline hobbit

  • Posts: 4750
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Key wont turn in ignition
« Reply #5 on: July 14, 2006, 18:26:07 »
On the 200 you can pop the electrics section off the back of the lock, held with two small screws

If you have disengaged the steering lock off the assembly you can start the motor with any suitable flat blade screwdriver

Also only dealt with the 200, but they are interchageable with the rrc units
Logged
Kev

'91 stretch Discovery 200 Tdi
Hybrid for running round (got to go now)
Srs 3 Lightweight petrol (got to go)
Srs 3 Lightweight petrol, runabout

Not every problem can be solved with duct tape, and it's exactly for those situations we have WD 40

Offline winchman

  • Posts: 1038
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Key wont turn in ignition
« Reply #6 on: July 14, 2006, 18:49:42 »
Thanks done that this morning, and ordered a new one from Craddocks
Logged
Remember it will come in handy even if you never use it
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal