ABS break peddel

[mark]

300TDi discovery with ABS
Breaks work fine however if you keep pressure on the break peddle the peddle drops slowly also if you pump the breaks three or four times the breaks feel wooden.

All the callipers have been checked, system bled, new pads and disks.
Any ideas?

[barmiebrumie]

Had that happen on my td5 changed the servo & master which seem to do the trick,


Hope that help's



John.

[ChrisW]

Are all your vacuum pipes ok?

[mark]

Good question, yes checked the vacume pipes, seems like a good vacume coming from the pump but must confess I've never checked it before to compare it against.

[Guardian.]

HI MATE
I WOULD SAY IF THE PEDAL SLOWLY GOES DOWN TO THE FLOOR THAT THE MASTER CYLINDER HAS WORN OUT.THE SEALS ARE LETTING THE OIL SLOWLY PAST AND HENCE PEDAL SLOWLY SINKS TO THE FLOOR.