Self-cancelling indicators don't

[pritch]

I've just changed the left-hand stalk on my 200TDi Disco.

However, the indicators don't self-cancel any longer.  Anyone got any ideas why, or what I may have done wrong?

[jjsaul]

indicators dont cancel (well, left indicator) on my RRC.....

[the loon]

if its the same set up as I used to have on the 90 theres a plastic ring that sits in behind the steering wheel and it has a raised section that catch's on the stalk and that turns the indicator off
Maybe the ring is out of alinegnment (had this problem on the 90 - easily fixed just remove steering wheel and re-aline)
Or it could be the ring is actualy damaged - if so try a breakers

[spy]

It is a similar if not the same setup.  Could also be the stalk itself?  Someone told me rover metro stalks work (they look the same) but when I tried one, the indicators didnt work.  I got it from a scrapper with no battery to so I couldnt test it 1st.  

Anyone know ow true this is?

[v8kenny]

I have used stalks from Maestro vans before and they work OK - same door handles as classic range rovers too   :roll:
As landyloony has already said - you will have fitted the new stalk without lining it up with the self cancelling ring - easy fix on a 90/110 - just unscrew the cowling and fix in situ
Don't know how easy this is to remove on a disco though - but surely must be easier than taking steering wheel off

[pritch]

Well, I'll give it a go when I get a round tuit.

It's actually the proper part, ordered new from Paddocks. And for what it's worth, taking the steering wheel off is surprisingly easy, once you've prised the badge out.

[v8kenny]

for what it's worth, taking the steering wheel off is surprisingly easy, once you've prised the badge out.

In which case it should be easy to check/sort then !