having a few probs

[essieb]

firstly happy new year
1,wont always go into first gear  so have to go into rev first ,its worse when cholks a little out but still happens when in its a replacemnt box not 6 mts ago also can be sticky going 1 -2
2,speedo stopped working again cheaked cables into transfer all seems ok an tips
oh thanks in advance
oh ita a h samuri

[fudge]

Gears...... Release Bearing ?

Speedo.... Kinked Cable ? Rounded End (s) ?

[generation-x]

hi m8
not able to get gears is most likely ur clutch not ur gear box

speedo you say you have checked the cable to the t-case have you took it out of the t-case to check the end hasn,t snapped off inside if all is well t-case side it may of popped out of the speedo at the back

let us no

simon

[essieb]

hi m8
not able to get gears is most likely ur clutch not ur gear box

speedo you say you have checked the cable to the t-case have you took it out of the t-case to check the end hasn,t snapped off inside if all is well t-case side it may of popped out of the speedo at the back

let us no

simon

got new clutchHigh profile i think{t.o.t.r from kap}
cant see owt on cable will cheak proper in dayligh ta m8ties

[generation-x]

did you get new thrust bearing with the kap kit?
if so i wud say stretched cable

simon

[essieb]

did you get new thrust bearing with the kap kit?
if so i wud say stretched cable

simon

would think cost enough  so but will try look 2moz if all else fails will go bug darren{kap}ta

[Boggert]

Sounds like the thrust bearing to me... But with out getting it apart you'll never know.

[Timi]

What about the bearing in the flywheel?
This is usually forgotten about and can cause selection problems aswell.

As for speedo, check the console/clock as well as transferbox speedo drive.