Topic: Feed to new fuse box in car?. (Read 1772 times)

Fuddy as muck · « **on:** January 16, 2007, 20:38:23 »

I'm going to put a new fuse box at high level inside the cab so that i can add a 12v power point, radio and interior light. My question is where is the best place to take the feed? i.e straight from the battery or extend it from the existing internal fuse box.

Darren

Dr Neil · « **Reply #1 on:** January 16, 2007, 20:41:29 »

If you take it directly from the battery you will have to remember to switch everything off so you don't flatten the battery.

dave_2A_2.25Turbo · « **Reply #2 on:** January 16, 2007, 21:20:26 »

You could wire in a heavy duty relay to make it ignition live

Fuddy as muck · « **Reply #3 on:** January 16, 2007, 22:48:37 »

Quote from: "dave_2A_2.25Turbo"

You could wire in a heavy duty relay to make it ignition live

Good idea. Certainly better than coming direct. Like Dr Neil has said the risk of forgetting to turn the radio off is quite high. Would you happen to know which way to connect the wires?

Darren

dave_2A_2.25Turbo · « **Reply #4 on:** January 17, 2007, 02:43:49 »

just the same as wiring in a set of spots - an ignition live replaces main beam

News:

AuthorTopic: Feed to new fuse box in car?. (Read 1772 times)

Fuddy as muck

Feed to new fuse box in car?.

Dr Neil

Feed to new fuse box in car?.

dave_2A_2.25Turbo

Feed to new fuse box in car?.

Fuddy as muck

Feed to new fuse box in car?.

dave_2A_2.25Turbo

Feed to new fuse box in car?.